General Landlording & Rental Properties
Market News & Data
General Info
Real Estate Strategies
![](http://bpimg.biggerpockets.com/assets/forums/sponsors/hospitable-deef083b895516ce26951b0ca48cf8f170861d742d4a4cb6cf5d19396b5eaac6.png)
Landlording & Rental Properties
Real Estate Professionals
Financial, Tax, & Legal
![](http://bpimg.biggerpockets.com/assets/forums/sponsors/equity_trust-2bcce80d03411a9e99a3cbcf4201c034562e18a3fc6eecd3fd22ecd5350c3aa5.avif)
![](http://bpimg.biggerpockets.com/assets/forums/sponsors/equity_1031_exchange-96bbcda3f8ad2d724c0ac759709c7e295979badd52e428240d6eaad5c8eff385.avif)
Real Estate Classifieds
Reviews & Feedback
Updated about 8 years ago on . Most recent reply
![Eric Bilderback's profile image](https://bpimg.biggerpockets.com/no_overlay/uploads/social_user/user_avatar/235561/1621435196-avatar-sinbad.jpg?twic=v1/output=image/crop=1916x1916@527x230/cover=128x128&v=2)
Tenet proofing floors
Do you guys suggestions on what to use for floors? I am remodeling my units on turnover and am putting down new floors. I put down pergo on the last place. It was 1.39 a foot including the pad or whatever underneath. I am kind of wishing I went with the 2.00 a foot stuff. It is supposedly water proof, lifetime guarantee, etc. These are for small 1 bd room apts. renting for hopefully $700 after the remodel a $100 increase.
Yesterday I went to look at a move out and I saw that a tenet had put a couple of dings in another wood floor. I am concerned that this will happen to the new floors.
Thank you for any advice,
Most Popular Reply
![Keith Lewis's profile image](https://bpimg.biggerpockets.com/no_overlay/uploads/social_user/user_avatar/347443/1694813158-avatar-kelewis.jpg?twic=v1/output=image/cover=128x128&v=2)
LVT is the way to go. Styles are available in wood plank look, stone look with grout(that self seals in 24 hours), floating click locks that are super water resistant( of course the tile is waterproof it's vinyl...seams are the issue) there's even one click lock that you can grout. Here's the Keys: nothing under a 3mm thick product, if you can afford 4mm or better do it. Wear layer should be 12 mils ( for those of you that don't know a mil is the thickness of a piece of paper) but 20 + is actually commercially rated. Also make sure you have a scratch resistant FINISH, Aluminium Oxide, Ceramic bead etc. If you are gluing it down I recommend using an acrylic adhesive which has more strength. Good Luck