I use it all the time to measure building dimensions. 

Along with perimeter width and length dimensions it had in the middle, TF= 56.75, VO= 53.42VO I think means View Out, TF ?

If you start changing hinges, take one off and bring it with you to the store because you'll be surprised at the variety of dimensions that change from hinge to hinge!

.), floor plan (layout, dimensions of rooms, lack of amenities/upgrades, etc.) and finally education of buyers.

What are the dimensions of a LVL beam that would be sufficiently strong to do the job of holding it up?

Another thing not mentioned to consider is on some older buildings the windows can be an odd size or shape with dimensions.

this is the scope of work. the dimension of the roof is roughly 45X151) Tear-off all layers of roofing and gravel down to wood decking and legally dispose. 2) Inspect wood decking and replace all deteriorated and broken areas at $ 2.50 per sq. ft. 3) Inspect existing Ceramic Copings and replace all deteriorated and broken at $ 35.00 Each.4) Install Fiber Cant Strip at the base of the walls and curbs.5) Install 1 layer of Base Sheet over wood decking using corrosion resistant screws and plats. 6) Install 1 layer of Modified Bitumen CertainTeed GTA Granulated. 7) Install Metal gravelstop and gutter flashings at the roof edges. 8) Flash all vents, soilpipes, and chimney using the same Modified Bitumen. 9) Install 5” Galvanized Box Gutter and 3x4 Downspout to replace existing. 10) Pick up and haul away all roof debris generated by Presidential.

It's also not a weird dimension, so cutting it in half would fit perfectly with the other lots around it in terms of shape and size.

If I forget to measure the final locations of the recessed lights before the sheet rock goes up, I usually refer back to the dimensions on reflected floor plans I gave to my electrician.

A previous post had some good advice about being able to fit a small night stand in on either one or both sides in a room of your dimension.